Mld Industry Technology Co., Ltd.
  • AddressNo. 2558, Juhe 8899 street, Jufuyuan National Development Base, Tongzhou District, Beijing
  • Factory AddressNo. 2558, Juhe 8899 street, Jufuyuan National Development Base, Tongzhou District, Beijing
  • Phone(Working Time)010-60551589
  • Phone(Nonworking Time)010-60551589
  • Fax010-60551589

Directional control valve

Contact Now

Directional Control Valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. The position of the spool restricts or permits flow, thus it controls the fluid flow.

 

Directional control valves can control the start, stop and change in direction of flow of a pressure medium (i.e. hydraulic oil). For this reason, they are also referred to as switching valves. Directional control valves are available as spool valves, poppet valves or rotary slide valves. Rotary slide valves, however, are no longer commonly used due to low operating pressure (up to 70 bar). Directional control valves without proportional control are referred to as switching valves.

 

CPDG-10 Pilot Operated Check Valve Hydraulic Part

1320x1850x480 480,000 mm
1320,000 mm NTN

Hydraulic Solenoid Directional Control Rexroth 4WE10

420.0000 560.0000
141,000.00 14,110,000

DMG-03 Hydraulic Manual Direction Control Valve Part

0,8 mm 0,15 mm
WMLF8014ZZ 4

PDF-100-20 Hydraulic Prefill Valve Directional Control

42 250
2.5 mm 1 mm

4WE6 Solenoid Operated Directional Control Hydraulic Valve

24 6 mm
12x24x6 12

CPDT-03 Pilot Operated Check Valve Hydraulic Part

DAC38710039 39
38x71x39 71

CPDF-16 Hydraulic Prefill Valve Directional Control

22 mm 110
1 60MM Bore; 110MM Out

DMT-10 Hydraulic Manual Direction Control Valve Part

NTN 307,975 mm
152,4 152,4 mm

Hydraulic 4WE6 directional control rexroth solenoid valve

3 mm 11.2 Kg
130 380 kN

CPDF-10 Pilot Operated Check Valve Hydraulic Part

Triple-lip seals 73.025 mm
5 ° 50.8 mm

DHG-10 Hydraulic Solenoid Pilot Operated Directional Valve

150 mm 670 r/min
2,6 558 mm
1/6